|
1
|
Lay out all the equipment.
|
|
2
|
Lay the tent out on the ground in the desired position, roof up and floor down.
|
|
3
|
Connect the fibreglass poles together to form 2 same length poles.
|
|
4
|
Insert one fibreglass pole into one of the sleeves on the side of the tent and then fix the end of the pole into the pin at the corner of the tent. Duplicate this action with the second pole. Attach the other end of each pole to the pin on the opposite, diagonal, side of the tent to form a crossed, hooped, structure.
|
|
5
|
Tie the tent to the fibreglass pole crossing point at the apex using the polyester tie.
|
|
6
|
Make sure the tent is symmetrical (making sure the door is closed) and pulled tight and then attach to the ground using the tent pegs, through the metal rings.
|
|
7
|
Tie the non-loop end of the guy ropes to the (lower) attachment points on the sides of the tent. The looped end can then be attached to the ground with a tent peg and adjusted.
|
|
8
|
Attach the roof panel to the top of the tent using the four hooks.
|
|
9
|
The tent is now ready for your enjoyment.
|
