|
1
|
Lay out all equipment.
|
|
2
|
Lay the inner tent out on the ground in the desired position, ie roof up and floor down.
|
|
3
|
Connect the fibreglass poles together to form 2 long poles and 2 shorter poles.
|
|
4
|
Insert the red fibreglass pole into the inner tent's red sleeve (left to right) and insert the blue fibreglass pole into the inner tent's blue sleeve (left to right). Insert the yellow fibreglass pole into the inner tent's yellow sleeve (front to back).
|
|
5
|
Insert the metal pin at one corner of the tent into the end of the red fibreglass pole and the other end of the pole should be inserted into the pin on the opposite side of the inner tent. Copy this for the blue fibreglass pole, forming a double crossing hoop structure. The poles will cross on both the left hand and right hand sides of the tent.
|
|
6
|
Attach the inner tent's flat hooks to the red and blue fibreglass poles.
|
|
7
|
Insert the metal pin located at the inner tent's mid front point into the end of the yellow fibreglass pole and the other end of the pole should be connected with the inner tent's pin at the rear mid point. |
|
8
|
Attach the inner tent's flat hooks to the yellow fibreglass pole. |
|
9
|
Tie the inner tent to the fibreglass pole's crossing points at the top and sides of the tent using the polyester ties. |
|
10
|
Make sure the inner tent is symmetrical (making sure the doors are closed and pulled tight) and then attach to the ground using the tent pegs, through the metal rings. |
|
11
|
Insert the final shorter fibreglass pole into the sleeve located on the underside of the outer tent (at front), directionally left to right. |
|
12
|
Ensure the roof vents are open by securing the velcro tag.
|
|
13
|
Put the outer tent over the top of the inner tent structure. The outer tent door should be adjacent to the two inner tent doors.
|
| 14
|
Use the ring and pin system to attach the shorter fibreglass pole to the inner tent structure. Attach the outer tent to the fibreglass poles using the polyester ties on the underside of the outer tent.
|
| 15
|
Attach the outer tent to the ground by pushing the tent pegs through the elastic hooks, ensuring the door is closed first and the outer tent is pulled tight. The back of the tent should be secured first and then the front.
|
| 16
|
Tie the non-loop end of the guy ropes to the attachment points on the sides of the outer tent. The looped ends can then be attached to the ground with tent pegs ensuring the guy ropes follow the natural line of the attachment point.
|
| 17
|
Attach the room divider to the loops within the tent, in the middle.
|
| 18
|
Position the separate groundsheet within the porch and secure with the toggles.
|
| 19
|
The tent is now ready for your enjoyment.
|
